WTB: Suspension related products for 180 TT Quattro

[NitrousVette]

ANy suspension related products for a 00' 180 TT Quattro. Ive just started Solo2 racing through SCCA and am looking for brand new or close to new products. PM me or post on this thread. Thanks in advance.

[ncttrnl]

PM Mikekim

He runs Pure Motorsports in Temecula. He has everything you need for a good price.

[NitrousVette]

god im such a noob......how do i PM?

[ncttrnl]

There should be a little link under your usename for Private Messages

There are also instructions in the FAQ here:
http://www.socaleuro.com/forum/faq.php?faq=vb_board_usage#faq_vb_pm_explain

[stereooptions]

hey Mikekim just verified in my thread that the suspensions are all the same for Quattro TT engine doesn't matter, so if you want the coilovers call me 714-612-6020

[NitrousVette]

I just talked to the guys at ABD racing and they said the coilovers for a 3.2 TT Quattro wouldnt even be able to be fabricated to a TT 180 Quattro.

[stereooptions]

whoever you talked to doesn't know what they are talking about, MikeKim is a much more knowledgeable vendor so if he says they work they work, but if you don't want the Eibachs I'll sell them elsewhere

[NitrousVette]

i am intrested in the eibachs....ill contact eibach co. and speak with a tech....my noly other concern is that the 3.2 front end is much heavier than that of a 180 TT. Im doing autoicross so i want the rebound of the struts to be designed for the weight of the car. They might has the same suspension components, but the weight is diff between these 2 cars.

[stereooptions]

difference in weight is 2-400lbs http://www.carsdirect.com/research/specs?cat=all&acode=USB60AUC113A0

also i bet if you could find an eibach kit labled for 180 TT the springs would be stamped with the same part number meaning the same spring rate. My buddy is an engineer there so he showed me how Eibach just puts different part numbers on the same exact kit.

[NitrousVette]

what was the listing price you posted for these struts on the other thread? you said $675.00 shipped?

[NitrousVette]

I just also talked to Mike from WIcked Motorsports and he verified as well that the struts will fit on my 180 TT. He actually said those would be better because since theyre made for a 3.2 the rebound will be much quicker because they were designed for a heavier car. So im down to buy those bad boys. should i call you and we can work out a time and place?

[stereooptions]

yes call me 714-612-6020

[NitrousVette]

i foun those same struts for $550 at http://www.drivewire.com/PerformanceParts/eibach/audittprodamperkit.html and for the similair price at some other sites. would you maybe be able to work out a better deal?

[stereooptions]

what you are looking at is a pro-damper kit 1567.840 (lowering springs and struts only) totally different set up. I'm selling 1570.710 which are coilovers and allow you to adjust the ride height so my price of $850 shows you its a deal. The Pro-street coilovers have an adjustable collar on the front strut and a rear adjustable perch which allow a 1-3" drop in the front and 1-2.5" drop in the rear. If you still want mine then call me 714-612-6020 price is firm

[stereooptions]

I'll cut you a deal $775 please let me know if you want them or not otherwise I'm shipping them off to TX. 714-612-6020