and heres an update lol

[Doug242ti]

So... 30 hours later, I've completely rewired the car again. LOL. Used a painless prewired kit this time, this is the ONLY way to go! Man theres alot of damn wires in a car lol

Heres we go
http://www.pbase.com/dkauer744/image/34895508.jpg
(The wires for my gauge pack are sticking up)
http://www.pbase.com/dkauer744/image/34895511.jpg
http://www.pbase.com/dkauer744/image/34895512.jpg
http://www.pbase.com/dkauer744/image/34895514.jpg
http://www.pbase.com/dkauer744/image/34895515.jpg
http://www.pbase.com/dkauer744/image/34895517.jpg
http://www.pbase.com/dkauer744/image/34895524.jpg
oil cooler pic, never got a good completed picture
http://www.pbase.com/dkauer744/image/34895525.jpg
The pile of poop left over. Thats AFTER I already wired the car again

So there we go. New ATP BOV (man its sweet looking), just waiting to get the pipe w/ the flange welded to back tomorrow. Start bending brake lines tomorrow. Also have to finish the headlight relay (hence the couple wires still hanging there).

The only wires that will be left in the engine bay are the ones behind the intake. The ones just hanging there off the DS edge are going through the fender well tomorrow :D

Oh, you can see I tried the red engine scheme... looked horrid.

Doug

[Slapshotnerd]

you nutso!!

so is this why you weren't at HID at San Mateo? I was lookin forward to shootin the shizzle with ya!!

[Doug242ti]

That would be why :D I actually wasn't planning on going back to HI(anything) but after hearing how it went this time around, I think I'll attend the next one.

I am going to be at SpeedGT this coming weekend :D

[bugzy]

good lord ... what have you done !! hahah

[Doug242ti]

haha I have no idea man. Tested almost all the cicuits today, everything seems to be working :D

Heres some updates

http://www.pbase.com/dkauer744/image/34958675.jpg
Except by the hood hinge, thats a wired engine bay. Only one vac line to run tomorrow and hook the fuel lines back up.
http://www.pbase.com/dkauer744/image/34958671.jpg
http://www.pbase.com/dkauer744/image/34958672.jpg
http://www.pbase.com/dkauer744/image/34958673.jpg
http://www.pbase.com/dkauer744/image/34958676.jpg
http://www.pbase.com/dkauer744/image/34958677.jpg
http://www.pbase.com/dkauer744/image/34958681.jpg
The trim plate for my intake to go through. Have to cut the hole tomorrow.

and ofcourse
http://www.pbase.com/dkauer744/image/34958680.jpg
powered by diet dr peper baby!

That ATP BOV is BEATIFUL!
http://www.pbase.com/dkauer744/image/34895519.jpg
http://www.pbase.com/dkauer744/image/34895521.jpg
http://www.pbase.com/dkauer744/image/34895522.jpg

[Doug242ti]

Oh boy! Here's some more pictures! Only a couple vac lines away from being done in the engine bay. (oh, and couple spots that need paint on the engine, and a general dusting now)

Heres some pics!

http://www.pbase.com/dkauer744/image/34995344.jpg
dont mention the crap welds, I already know (Im learnin ok!)
http://www.pbase.com/dkauer744/image/34995345.jpg
http://www.pbase.com/dkauer744/image/34995346.jpg
http://www.pbase.com/dkauer744/image/34995347.jpg
http://www.pbase.com/dkauer744/image/34995348.jpg
new brake lines, v.10 LOL.
http://www.pbase.com/dkauer744/image/34995349.jpg
http://www.pbase.com/dkauer744/image/34995350.jpg
http://www.pbase.com/dkauer744/image/34995351.jpg
http://www.pbase.com/dkauer744/image/34995352.jpg
http://www.pbase.com/dkauer744/image/34995353.jpg

Almost there (I think lol)

Doug

[Dougie67]

dam that looks nice and clean
cool

[SYNYSTAGLI]

Sick!!!!!!! Great Job Bro!!!!!

[Paul]

Very nicely done!

[Tom (aka Godzilla)]

Damn that looks good. Who does all your tube fabrication? Do you have any issues with that long pipe going to your intake manifold and the engine torqueing over? That radiator enclosure looks good, but why do you have part of the backside covered?

[Doug242ti]

dam that looks nice and clean
cool

Who is this? Your avatar is from MY pbase gallery!

Got it all done sunday... stuck thermostat puked a headgasket.

I do ALL the fabrication on the car except for some welding, the paint and the header. Every other thing I've done myself.

:D I need to get some finished shots lol

[Alan_One]

pic of the intake from under the car?

Awesome work.

[socal328]

very nice, cant wait to see it finished! good luck :tup:

[JettaGLI6spd]

very sweet, keep taking pictures of it as it goes

[wikedgolf]

daym.. thats a lot of wires.

[Doug242ti]

Thanks guys :D

putting off looking at the car till this weekend when I do the headgasket lol