Feeler: Whos up for a dyno day in SD??

[Monster8V]

At out shop at JMC in Kearny Mesa.

$50 for 3 pulls with A/F readings. (2wd only) <--------EDM, LOOK!!!

The date will have to be October 27th as we are very busy racing from now til then, its the only open weekend we have available and I thought it might be fun.

Anyways, post up if your interested. If I can get 10 cars we will do this. Max of 15 cars.

I think this is the list of those who wish to participate. If its wrong or you want me to add you, lemme know.

1)T-Red
2)Rokomis
3)bugzy
4)Aaron
5)SYNYSTAGLI
6)themandillon
7)fenix420
8)badbidet
9)EuroTunerGLI
10)daygoVR6
11)Aero
12)jwill'sMK4
13)20aeman
14)1965truckrod
15) 318daily

[Paul]

i'm down to watch.

[reddvdub]

I'm in....!!

[Rokomis]

I am in.

[EDM]

2 or awd dyno?

[bugzy]

i dont think my car is putting down the power its suppose to

ill bet im only getting 350 chp :(

[daygoVR6]

do I dare bring over the VW with my company logos all over it =)

whats going on Shawn - we need to do another kart night soon

[Aaron]

I'm Curious of what my GTi has to offer

[Monster8V]

do I dare bring over the VW with my company logos all over it =)

whats going on Shawn - we need to do another kart night soon



Yeah man, bring it!
Besides we sell your produts so it wont be no confrickt of no damn interhest!:D

[SYNYSTAGLI]

hmmmmmm, I might be in on this...

[Pireboi251]

Ill go just as good Karma for the failed one i had last month >_<

but dont expect any pulls out of me... i already know exaclty what i have ^_^

[g60racer]

What kind of dyno?

[themandillon]

im in if i can scrounge up 50 bones by then.

[fenix420]

should have my 50 trim in by then so i'll definatly be down to see what i put down with that.

[EDM]

At out shop at JMC in Kearny Mesa.

$50 for 3 pulls with A/F readings. (2wd only) <--------EDM, LOOK!!!

The date will have to be October 27th as we are very busy racing from now til then, its the only open weekend we have available and I thought it might be fun.

Anyways, post up if your interested. If I can get 15 cars we will do this.

Sorry didn't read the fine print. :(

[badbidet]

I have been waiting till I fixed my boost leak. I think I did, so I am definitely down.

[daygoVR6]

Yeah man, bring it!
Besides we sell your produts so it wont be no confrickt of no damn interhest!:D

heheh ya i know.....

[g60racer]

What kind of dyno?

^^?

[EuroTunerGLI]

im down...im interested to see how my mkiv does with the big turbo :german:

[Monster8V]

What kind of dyno?

Just got home from work......
Its a state of the art Dyno Dynamics chassis dyno! :tup2:

More info, if we get 10 cars, we run so that makes it simple and easy. No big rush to get 20 cars done.

[FunkTron]

in to spectate........car still in the FCKING SHOP!

[Monster8V]

Updated main post and added entry list.

[Aero]

Umm, as of right now I'm definitely down. Still a ways away though... and something always seems to get in the way of fun, car related activities.

[jwill'sMK4]

i thought i marked yes well if not then im in

[Monster8V]

added you 2!

[anitx]

Will the Turbo S be there??? :D:D:D:D:D:D

...I still say a little prayer at night that one day, I will own one...

[Monster8V]

It will be there but wont run it on the dyno.


Will the Turbo S be there??? :D:D:D:D:D:D

...I still say a little prayer at night that one day, I will own one...

[g60racer]

I'll come spectate. I only dyno on Dynojet 248c's or 288x's that way I can consistently track my performance from mod to mod. Changing dyno's always changes the numbers and makes it impossible to track changes.

[Monster8V]

I'll come spectate. I only dyno on Dynojet 248c's or 288x's that way I can consistently track my performance from mod to mod. Changing dyno's always changes the numbers and makes it impossible to track changes.

We can (and often do) "correct" to give you true (although inflated) dynojet numbers.

[20aeman]

I'm in, gotta see how this water meth is working for me

[Monster8V]

I'm in, gotta see how this water meth is working for me

Cool, your added to the list.
Only a few more slots available!
(Or a big fat bribe at the shop!) You know!!!:D

[badbidet]

Im in to see how the WAI is.^^ Also so I can get a good base for when I get mine.

[jwill'sMK4]

is my side exit exhaust gonna be a problem also im not running a cat

[fcastle]

I'm in I need to see what progress I've made and what the A/F curve looks like before the final big mod.

[Monster8V]

is my side exit exhaust gonna be a problem also im not running a cat


Not a problem. The 1st Gen RX7 race car has a side exhaust too, works fine.


Thanks fcastle for the edit! :tup:

[jwill'sMK4]

can i swap wheels between pulls?

[T-Red]

I'll come by to watch, and then.... maybe. I'm disapointed with my results the last time, and maybe with a new MAF sensor and a few other tweaks, I might sign up for some pulls.

Question: if I sign up, I want in the driver's seat. I want an expert sitting next to me, to tell me what to do, but I want it to be my foot on the pedal. Is this going to be a problem?

A comment about the last time: I think a lot of the guys were unaware when they signed up for HP and fuel/air that they were NOT going to get torque. Fuel/air is useful for tuning, but torque is more important for bragging rights. As for me, I knew fuel/air was totally useless for a TDI. But I heard some grumblings.

Edit: count me in

[jwill'sMK4]

r we not gonna get to see torque this time around?

[JETTAone420]

if i have 50$ laying around by time this comes lol im down...if not im goin anyways

[jwill'sMK4]

if i have 50$ laying around by time this comes lol im down...if not im goin anyways


mini-caravan?

[T-Red]

r we not gonna get to see torque this time around?

What I meant was, folks were asked if they wanted fuel/air. But unless they asked, they were not told that if they got fuel/air, they would not get torque. I believe several people assumed that HP and torque would both be provided, and if they said they wanted fuel/air, then they'd get that in addition (not instead).

[jwill'sMK4]

i see thx for the confusion/clarification lol

[Monster8V]

can i swap wheels between pulls?


No. We would have to completely unstrap the car, plus the time to change the wheels.
For this event, we cant do it but if you want to schedule some dyno time at a later date, we can accomidate the test with the wheel swap.


r we not gonna get to see torque this time around?

Normally we do HP with the AF ratio layed over the chart. We can do torque, all you have to do is tell whomever is running the dyno computer to print out a torque chart too, isnt a problem. ;)

We can do it however you like really. There are a few formats that can be used but the problem for us is (old software) we cant print HP with TQ on the same sheet. (This dyno uses something called "Trantional effort" which is a more effectient way to show torque although its numbers are different. So we just print 2 sheets for the masses!

[Monster8V]

Question: if I sign up, I want in the driver's seat. I want an expert sitting next to me, to tell me what to do, but I want it to be my foot on the pedal. Is this going to be a problem?


Unless your trained on using a dyno, either myself or another employee will be the ones driving the car on the dyno. We tried this yesterday with a customer under tight time constraints and honestly it was more trouble than it was worth. There is a way to prepare the car for a pull and if not done right, its just a waste of time with the format we are trying to use to get all the cars done.

If this were a private dyno session, we could work something out but for this special SocalEuro day, were gonna have to be the ones making the noise. :tup:

[T-Red]

Unless your trained on using a dyno, either myself or another employee will be the ones driving the car on the dyno. We tried this yesterday with a customer under tight time constraints and honestly it was more trouble than it was worth. There is a way to prepare the car for a pull and if not done right, its just a waste of time with the format we are trying to use to get all the cars done.

If this were a private dyno session, we could work something out but for this special SocalEuro day, were gonna have to be the ones making the noise. :tup:

Then might I sit in the passenger seat during each pull?

The TDI has enough torque to idle in 4th gear at 900 rpm. I'd like to see the full curve from about 1300 rpm all the way to 4800 or so. The guy running it last time basically gave me 2000 to 4000 rpm. I was a bit disappointed in the results, so just want to make sure it gets done right the next time... whenever that is.

[1965truckrod]

I'd like to take the 15th spot if it is still available

Jesse

[fcastle]

I'd like to take the 15th spot if it is still available

Jesse

You can have my spot. Fucking boss.

[Monster8V]

You can have my spot. Fucking boss.

Sorry to hear you cant make it. We might be there later in the day so if you want to try and come by then, im sure I can free up a spot to fit you in man. ;)

fcastle is out, 1965truckrod is in! :tup:

Still one slot open. :hitit:


Then might I sit in the passenger seat during each pull?

Im sure I can swing that for you. What you can do to speed up the proccess is tell me what the (MPH) speed is at the RPM you want to start the pull in. (So we can set up the dyno graph quicker.)

[1965truckrod]

Sweet I'll keep it on my calander I am curious to see what all of this crap is doing. Hopefully I can figure out the reason why my car will sometimes drop down to stock boost during hard driving.

Jesse

[anitx]

Still one slot open.

I wonder if there are REALLY 88 ponies in the 2.0 New Beetle :confused: :rolleyes:

..I'll be there...watching ;)

[boostedMKIV]

Damn, i wont be able to go b/c thats track day at california speedway and ill be doing some 1/4 mile runs to get some base numbers for my car b4 i started modding her up.

[jwill'sMK4]

i got a buddy that wants to bring his honda down but hes not for sure if he'll be able to so u think i should jus have him come down and hope someone doesnt show or fill the last spot and hope my friend shows?

[badbidet]

As long as he only gets A/F and TQ read outs :D

[T-Red]

Still one slot open. :hitit:

Mark me down.

If it turns out like the last time, nearly half those who say they'll attend won't show up. If this happens, then anyone who just wants to show up should try to get there early. Otherwise they might close up shop.

[Pireboi251]

^_^ are you making reference to the d-day i hosted at Rev'd up d? ^_^...

cause seriously... i was embarassed that only 4 ppl that sigend up showed...everyone else was ppl that saw the shop open and stopped by

[T-Red]

Yep, that was the one. What happened to everyone else?

[jwill'sMK4]

As long as he only gets A/F and TQ read outs :D

lol

[reddvdub]

My spot is up for grabs since I totalled my car and they don't have an awd dyno for my .:R =)
I'll make it to watch though!!

[Defconracing]

possibly in with a 2007 Mercedes S600 Biturbo. Im not sure, so i will just show up with the car.

otherwise, i will watch, unless i can slap my Ford SUV on, which would actually be kinda funny.

[jwill'sMK4]

this still gonna happen?

[Monster8V]

My spot is up for grabs since I totalled my car and they don't have an awd dyno for my .:R =)
I'll make it to watch though!!



Sorry to hear that man, hope your OK?

Ill put T-Red in your spot. Still one spot open and yes, its still gonna happen!

I just got off the yaught an hour ago from my vacation to back home so ive got some catching up to do since the internet out on the open seas pretty much sucked.

[318daily]

I'll take that last spot if it's still open.

I think i'm running kinda rich so I'd like to verify.

[Monster8V]

I'll take that last spot if it's still open.

I think i'm running kinda rich so I'd like to verify.



Your in no problem.

If anyone else is interested, message me for the stand by list or just show up and beg alot. :D;)

[Rokomis]

Are the fires going to effect the dyno day?

[Monster8V]

Are the fires going to effect the dyno day?



Nope, not even a little.

[anitx]

TIME??

Directions?

[Monster8V]

TIME??

Directions?


From your bed to the shop.... it only takes.... whoops!!!! Shhh, I know........ thats a secret.... ;)

right around 9:30am til whenever were done.

we are located at:

4783 Ruffner St.
San Diego, Ca 92111

http://maps.google.com/maps?q=4783+Ruffner+St.&rls=com.microsoft:en-us:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7DKUS&um=1&sa=N&tab=wl

These are the people I fully expect to show up:

1)T-Red
2)Rokomis
3)bugzy
4)Aaron
5)SYNYSTAGLI
6)themandillon
7)fenix420
8)badbidet
9)EuroTunerGLI
10)daygoVR6
11)Aero
12)jwill'sMK4
13)20aeman
14)1965truckrod
15) 318daily


If your plans have changed or you simply cant make it, let me know ASAP because I have a waiting list of people who will show.

[jwill'sMK4]

From your bed to the shop.... it only takes.... whoops!!!! Shhh, I know........ thats a secret.... ;)

right around 9:30am til whenever were done.

we are located at:

4783 Ruffner St.
San Diego, Ca 92111

http://maps.google.com/maps?q=4783+Ruffner+St.&rls=com.microsoft:en-us:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7DKUS&um=1&sa=N&tab=wl

These are the people I fully expect to show up:

1)T-Red
2)Rokomis
3)bugzy
4)Aaron
5)SYNYSTAGLI
6)themandillon
7)fenix420
8)badbidet
9)EuroTunerGLI
10)daygoVR6
11)Aero
12)jwill'sMK4
13)20aeman
14)1965truckrod
15) 318daily


If your plans have changed or you simply cant make it, let me know ASAP because I have a waiting list of people who will show.


eh so early man i gotta make the trek from riverside so i think i may be late is this gonna be in the order of the list or no and if i make it at 9:30 do i get breakfast???:D

[Monster8V]

Dyno day has been canceled!

Sorry guys, due to the fires and the fact were storing a few other shops gear here, were gonna have to cancel for a later date.

Sorry guys, this decision was just made by the boss.

[Pireboi251]

So is there a new date... im thinking about doing a run... im not feeling confident about my run from revd up for some reason...

how did i do 158hp abnd ~195 tq with just a modded box

[Monster8V]

Looking at the end of Nov early Dec. Were still trying to juggle our schedule to make it happen.