DAVE_W
02-11-2008, 04:00 PM
SOLD!!!!!!!!
2006 YFZ450 with every upgrade and after market part available. The engine was rebuilt over the summer and only has about 10 hours on it. It has been dyno tuned and I have graphs for 49.7HP to the wheels.
This is a SERIOUS DUNE quad. Asking $10,000 FIRM I will consider partial trades for a late model 450cc Dirtbike.
I'm ready for a new project :)
After market components include
Chassis | Suspension | Controls:
A-Arms: +2 Work Performance
Swing-arm: +2 Custom Quad works
Steering Stem: Rated X +2
Stabilizer: Precision Racing
Axle: Durablue X 33
Locknut: Durablue
Hubs F|R: Durablue with hub caps
Bars: Tag Fat Bars
Throttle Lever: Honda 400EX
Grips: ODI
Nerfs: Pro Armor 2007 Fatpeg
Bumper: Pro Armor 2007 Racing
Grab Bar: Pro Armor 2007 Racing
Front Shocks: Works Performance Black Widow Quad rates with remote Dual line recalculating rezzies.
Rear Shock:Works Performance Black Widow Quad rates with remote Dual line recalculating rezzies.
Brake Lines: Stream line
Brake Clamps: Stream line
Rotors F|R: Stock Front / Iron Rhino Designs Rear
Rims F|R: Douglas Blue Labels
Tires F|R: Sand Tires Unlimited Sand Skate 2 Paddles / Sand Tires Unlimited Razors
Parking Brake Block-Off: Pro Armor
Levers: ASV
Start Button: YZF kill switch
Killswitch: Pro Armor
No beadlocks anymore, just black blue labels and same tires.
Body:
Plastic: Polisport Silver
Seat Cover: Jet Trim custom Ostrich Skin
Lights: Stock replacement Trail Tech MR11 HIDS and wired for helmet lights as well.
Carbon Fiber: PC Carbon Light block offs, Right frame guard. Left Frame guard
Fuel Cap: Project 321 Red anodized with carbon fiber insert
Powder Coat: Flat black and Candy Red by ECP Powder Coating
Whip mount: Stiffy Whips
Engine|Drive System:
Cylinder|Head: Stock with porting
Bore & Stroke: Stock
Crank: Hot Rods WR Crank
Displacement: 450cc
Cams: Hot Cams
Porting by: Reno Performance ATV
Carburetor: 43mm Bored
Air Filter|Intake: Fuel Customs Intake
Pipe|Silencer: LRD Pro 4 With spark arrestor and quiet core
Clutch|Plates: stock
Boyesen High flow water pump
2007 crank case mod with oil squirter.
Gearing F|R: Tag 13T / 36T
Flywheel: Trail Tech -6
Pics:
http://www.intheredgraphix.com/QUAD/4.jpg
http://www.intheredgraphix.com/QUAD/5.jpg
http://www.intheredgraphix.com/QUAD/7.jpg
http://www.intheredgraphix.com/QUAD/8.jpg
http://www.intheredgraphix.com/QUAD/9.jpg
http://www.intheredgraphix.com/QUAD/10.jpg
http://www.intheredgraphix.com/QUAD/11.jpg
http://www.intheredgraphix.com/QUAD/12.jpg
http://www.intheredgraphix.com/QUAD/13.jpg
Video B4 engine work:
DzsugcfPBgc
2006 YFZ450 with every upgrade and after market part available. The engine was rebuilt over the summer and only has about 10 hours on it. It has been dyno tuned and I have graphs for 49.7HP to the wheels.
This is a SERIOUS DUNE quad. Asking $10,000 FIRM I will consider partial trades for a late model 450cc Dirtbike.
I'm ready for a new project :)
After market components include
Chassis | Suspension | Controls:
A-Arms: +2 Work Performance
Swing-arm: +2 Custom Quad works
Steering Stem: Rated X +2
Stabilizer: Precision Racing
Axle: Durablue X 33
Locknut: Durablue
Hubs F|R: Durablue with hub caps
Bars: Tag Fat Bars
Throttle Lever: Honda 400EX
Grips: ODI
Nerfs: Pro Armor 2007 Fatpeg
Bumper: Pro Armor 2007 Racing
Grab Bar: Pro Armor 2007 Racing
Front Shocks: Works Performance Black Widow Quad rates with remote Dual line recalculating rezzies.
Rear Shock:Works Performance Black Widow Quad rates with remote Dual line recalculating rezzies.
Brake Lines: Stream line
Brake Clamps: Stream line
Rotors F|R: Stock Front / Iron Rhino Designs Rear
Rims F|R: Douglas Blue Labels
Tires F|R: Sand Tires Unlimited Sand Skate 2 Paddles / Sand Tires Unlimited Razors
Parking Brake Block-Off: Pro Armor
Levers: ASV
Start Button: YZF kill switch
Killswitch: Pro Armor
No beadlocks anymore, just black blue labels and same tires.
Body:
Plastic: Polisport Silver
Seat Cover: Jet Trim custom Ostrich Skin
Lights: Stock replacement Trail Tech MR11 HIDS and wired for helmet lights as well.
Carbon Fiber: PC Carbon Light block offs, Right frame guard. Left Frame guard
Fuel Cap: Project 321 Red anodized with carbon fiber insert
Powder Coat: Flat black and Candy Red by ECP Powder Coating
Whip mount: Stiffy Whips
Engine|Drive System:
Cylinder|Head: Stock with porting
Bore & Stroke: Stock
Crank: Hot Rods WR Crank
Displacement: 450cc
Cams: Hot Cams
Porting by: Reno Performance ATV
Carburetor: 43mm Bored
Air Filter|Intake: Fuel Customs Intake
Pipe|Silencer: LRD Pro 4 With spark arrestor and quiet core
Clutch|Plates: stock
Boyesen High flow water pump
2007 crank case mod with oil squirter.
Gearing F|R: Tag 13T / 36T
Flywheel: Trail Tech -6
Pics:
http://www.intheredgraphix.com/QUAD/4.jpg
http://www.intheredgraphix.com/QUAD/5.jpg
http://www.intheredgraphix.com/QUAD/7.jpg
http://www.intheredgraphix.com/QUAD/8.jpg
http://www.intheredgraphix.com/QUAD/9.jpg
http://www.intheredgraphix.com/QUAD/10.jpg
http://www.intheredgraphix.com/QUAD/11.jpg
http://www.intheredgraphix.com/QUAD/12.jpg
http://www.intheredgraphix.com/QUAD/13.jpg
Video B4 engine work:
DzsugcfPBgc