stevehayes01
01-27-2005, 11:54 PM
Ok here is a site that will give you all the information on the SAAB APC turb/Knock control system. This will not only describe the theory and design but will also show you how to spend $10 dollars at radio shack and turn your 1983-1992 SAAB APC system into a great high boost tubo controller. IF you run a SAAB C900 or a C9000 then you have an APC system that can be modified to support up to 1.8Bar boost pressure while still maintaining knock detection and saving your motor from detonation. These mods also apply to you Volvo guys that use the APC system in your olded 240's and 700 and 900 series turbo's. I have modded 2 APC's for my car and sustain 19PSI on nice cold days with no problem on 91octane gas. Well enough of the long windedness here and on to the site.
http://900aero.com/ (http://900aero.com/) --- APC Theory is under the Tech section
You can also download white gauge faces for your C900 SAAb that you can print for your car from this site as well.
http://900aero.com/ (http://900aero.com/) --- APC Theory is under the Tech section
You can also download white gauge faces for your C900 SAAb that you can print for your car from this site as well.