View Full Version : TCU "Tranmission control unit (18034) code on vag?
Audi S4 Turbo
05-15-2005, 08:59 PM
ok well i did the torque braking thing an held it at 2500 to try it out and i vaged my ...car and it says i have a TCU code 18034 and can you explain what it IS and Does and what do i do now to fix it, im under warrenty so i dont care..
mitssn
05-15-2005, 10:53 PM
18034 P1626 Data-Bus Powertrain Missing Message from Transm.Contr.
Just clear the TCM and the ECM... I don't think it's a big deal what so ever. See if it comes back. Have you had either out of the car?
Audi S4 Turbo
05-16-2005, 08:43 PM
ohh just clear it? is that my answer to why it is shifting hard and boost comes on late? i read on biturbos4.com that you can fry it what ever frying means in this situation.. but should i go to the dealer or just clear it. and if i do clear it will it perform to the way it should and better..
mitssn
05-16-2005, 11:36 PM
I didn't know that the car was giving you trouble.... Personally, I would clear it and see if it acts better. If it doesn't, you can be pretty sure that the code will come back.... Then I'd take it to the dealer. Just my $.02
Tom (aka Godzilla)
05-16-2005, 11:51 PM
The torque braking trick can burn out some of the internal portions of your tranny if you're chipped.
The error code you have doesn't seem related to that though. If your tranny is shifting poorly, it may have reverted to 'safe' or 'limp' mode and resetting the TCU might clear it up.
Audi S4 Turbo
05-17-2005, 05:53 PM
ok ill give it a try tomarrow and clear it and see if it shifts nicely.. it shifts nice at regular driving its when i rev it higher its a problem.. thanks
vBulletin® v3.7.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.