My 250.00 GTI update

[SYNYSTAGLI]

Well I've been doing some thinking about the wide body kit....I really need some more power from my lil 1.8 8V to be running that kit, so I went out and ordered a kit...basically everything i need cept a few things I will need for the IC and some things needing to be welded, and also when I roll to the gtg's now I don't have to do my imitation blowoff :D

http://synystavr6.vwmafia.net/A1rims/gettingthere.JPG


T3 garret air research re-built turbocharger with warranty
Durable cast t3 turbo exhaust manifold
Welded turbo downpipe section
Internal wastegate
Turbo to manifold gasket
Manifold to turbo grade 8 studs and locking nuts
O2 sensor bung welded on downpipe section
Oil feed hose
Oil feed "t" fitting
Oil feed restrictor
Oil inlet turbo fitting
Oil drain turbo fitting
Oil drain hose
Weld-on oil pan drain fitting
Bosch blow off valve
Turbo brain box
Wiring harness
Microfueler
Microfueler fuel line
Microfueler fuel fitting
Microfueler double banjo "t" fitting
Intake elbow
O2 sensor wire pigtail
Microfueler boost sensitive switch
Dual microfueler and power rely
Boost controller
Intercooler
Air/Fuel Ratio Gauge
Gauge Boost Gauge


Should be here real soon, I also have sitting in my garage waiting to be installed:
Full A1 poly kit
Eurosport exhaust
Eurosport 4pt lower stress bar
Neuspeed Upper strut bar
Neuspeed rear triangulated strut bar
An old school "KENT" cam timing gear

It's gonna be a busy weekend for me :D

[bugzy]

oh dang !! gonna be a fast hare .. i mean rabbit !

[Arts_1_8t]

omg!!! i wanna ride first!!! LOL!!!

:thumbsup:

[JoeVeeDubber]

Wowzers! Did Manny find a goldpot at the end of the rainbow the last storm we had or something, sheesh! Good luck with the project, took no time at all for that bunny to receive some TLC!

[creanium]

Damn dude, I better get a ride in that thing when you're all done! :cool:

[FunkTron]

Damn dude, I better get a ride in that thing when you're all done! :cool:


:stupid: :smokem:

[wrongbeach]

damn your name change threw me off bro... can't wait til i have another saturday off so i can come down and chill again.

[SYNYSTAGLI]

damn your name change threw me off bro... can't wait til i have another saturday off so i can come down and chill again.

LMAO, anytime bro. And tell your brother to get his ass out here and weld up all my hole in my bunny like he did to beakers shizz :D :thumbsup: :thumbsup:

[chris]

T3 garret air research re-built turbocharger with warranty
Durable cast t3 turbo exhaust manifold
Welded turbo downpipe section
Internal wastegate
Turbo to manifold gasket
Manifold to turbo grade 8 studs and locking nuts
O2 sensor bung welded on downpipe section
Oil feed hose
Oil feed "t" fitting
Oil feed restrictor
Oil inlet turbo fitting
Oil drain turbo fitting
Oil drain hose
Weld-on oil pan drain fitting
Bosch blow off valve
Turbo brain box
Wiring harness
Microfueler
Microfueler fuel line
Microfueler fuel fitting
Microfueler double banjo "t" fitting
Intake elbow
O2 sensor wire pigtail
Microfueler boost sensitive switch
Dual microfueler and power rely
Boost controller
Intercooler
Air/Fuel Ratio Gauge
Gauge Boost Gauge


Should be here real soon, I also have sitting in my garage waiting to be installed:
Full A1 poly kit
Eurosport exhaust
Eurosport 4pt lower stress bar
Neuspeed Upper strut bar
Neuspeed rear triangulated strut bar
An old school "KENT" cam timing gear

It's gonna be a busy weekend for me :D

Why didn't you tell me you won the freakin' LOTTO Bro :eek: That's gonna be one Sik ass bunny :thumbsup:

[Mr. Nobody]

Seriously Manny, go F yourself.

Lucky bastid, mumble mumble...

:D

That's going to be some hot isht man. You better bring that thing out to the N. county gtg asap after that turbo is on.

[FunkTron]

i think the first thing he needs to do is....take that thing out on the 52....plenty of very very long straight freeway....and...whaddaya know...it just happens to come out to Santee. O=o)

come stop by and say hi!!!

[evilcaddie]

manny the x bar is sweet i want to see it at the aug. GTG :thumbsup:

and what kind of cam are you running

[evilcaddie]

hey did you think off using a g60 head or the whole block that might be a little better than that 1.8 8v the gee6tee would take the abuse of the boost better.

just an idea .

[SYNYSTAGLI]

I'm going to use the stock setup for now, not trying to run crazy boost or anything. I just want the car to move when needed.

[16vMk2DoHC]

damn manny ur car looks hot cant wait for u to put on those turbo i wanna take a ride with ya :thumbsup: peace jerran

[evilcaddie]

cool man it will be a fun car

[SYNYSTAGLI]

cool man it will be a fun car

While waiting for stuff to get here I've been buying stuff for her:

http://www.fototime.com/{071F07BA-F96C-482E-8CCC-5D70CB6A11D7}/picture.JPG

http://www.fototime.com/{418489E2-27C6-4E1D-A1FC-F6C4AF966442}/picture.JPG

http://www.fototime.com/ftweb/bin/ft.dll/standard?pictid={8A22F52A-A0E7-420C-8354-70994383D130}&exp=f&moddt=37914.7321205671

http://www.fototime.com/ftweb/bin/ft.dll/standard?pictid={F7490213-CDAA-4C16-901A-125CCAEDDBD1}&exp=f&moddt=38115.9913438542

:D

[mike]

I'm going to use the stock setup for now, not trying to run crazy boost or anything. I just want the car to move when needed.

thats an understatement, Mk1 GTI's weren't exactly a slouch to begin with!

[creanium]

Judging by the DOT label on those headlights, I assume they're NA-Spec and not e-codes?

[SYNYSTAGLI]

Judging by the DOT label on those headlights, I assume they're NA-Spec and not e-codes?

- DESTINCTIVE European Beam pattern __/ __/
-Advanced Multi-surface reflector design and clear lens, also known as "FF technology" as developed by Hella over a decade ago.
-Produces 45% more luminous beam on low beam and 30% more luminous beam on high beam than conventional sealed beam headlamps.
-Glass lens!
-Die-cast aluminum reflector
-For more reliable quality and less tolerance in beam output performance.
-Replaceable H4 / HB2 12v 60/55w bulb (read: Cost effective & Light effecient)
-SAE/ECE approved, 100% street legal use

[FunkTron]

not too shabby!!

[Damon]

Wow! That's hot... good luck with the project. :tup: :eek: