PDA

View Full Version : FS: Forge 007 DV [diaphram]


spooky
09-27-2005, 12:11 AM
up for sale: Forge 007 DV (black) used for about 40k miles~ no problems w/ it at all. the DV was re-greased every oil change I had... so about 4-5 times.

- green spring
- I'll include Mobile 1 synthetic grease.

I'm bringing it to the Hooters GTG in ANAHEIM on Wednesday. If no one buys it their. Then, I'm open to all offers.

$65 I'm in Irvine.

LAZY TURBO
09-27-2005, 12:14 AM
wut does a diverter valve actually do?

kavik
09-27-2005, 12:18 AM
ygpm

spooky
09-27-2005, 12:22 AM
wut does a diverter valve actually do?

dumps the charge-air back into the intake rather then a BOV which releases the charge air thru the atmosphere. the diverter valve is more reliable maintaining boost, holds very well and creates quicker throttle response!

spooky
09-27-2005, 12:25 AM
ygpm

replied

LAZY TURBO
09-27-2005, 12:32 AM
if my car is auto, will this make a dif? if so please let me ill probably take this off ur hands

spooky
09-27-2005, 12:35 AM
if my car is auto, will this make a dif? if so please let me ill probably take this off ur hands

I am the 2nd owner of the DV, i bought it off an auto GTI 1.8T! it will make a difference for sure.

Arts_1_8t
09-27-2005, 01:06 AM
the forge 007 holds boost better than stock, the stock one will rip under high boost over time. i had an HKS BOV on my 1.8t for over 3 years, removed it due to pressure from the dealership, not gonna warrenty my car...long story (rough morning start ups, updated software, the cars back to normal). never had any problems with it, no cel, or limp mode. other than it scaring kids, people, cars, buses, small and large animals, attracting attention from other motorists and cops...lol

both will do its job, one vents ther other recycles. the only difference i noticed between the two, one's louder than the other. i currently have the turbo XS H25 bypass valve and a AEM CAI. it makes a whoosh sound, rather than a PPHHHHSSSSTTTTT!!!

LAZY TURBO
09-27-2005, 01:08 AM
does this make any sound at all?

spooky
09-27-2005, 01:24 AM
does this make any sound at all?

when you "reverse' the position of the DV! you get a loud 'dead bird cry' sound

LAZY TURBO
09-27-2005, 01:29 AM
when you "reverse' the position of the DV! you get a loud 'dead bird cry' sound


lolllllll i ment does it make any sound like a blow-off or any PLEASING sound?:)

spooky
09-27-2005, 01:31 AM
lolllllll i ment does it make any sound like a blow-off or any PLEASING sound?:)

like i said, it only makes a sound when in 'reverse' position. and that "dead bird cry" gets a lot of heads turned.

Arts_1_8t
09-27-2005, 01:48 AM
i get a whoosh out of my bypass valve, its reversed. i get the whoosh when i let go the throttle when switch gears. but i have an intake or cold air intake to help it out. this vavle should do the same thing.

lostntainted
09-27-2005, 08:42 AM
i also have the 007 and there is a small amount of noise when letting off the boost, as for a difference in power? best little $80 i spent.. i mean it doesn't give you 50whp but for the money it's definitely worth,... but i also have a question.. what is the difference in how many rings i place on the inside with the spring? i tried a few different set ups and didn't notice anything.. can someone help me out on this? :confused:

spooky
09-27-2005, 10:22 AM
i also have the 007 and there is a small amount of noise when letting off the boost, as for a difference in power? best little $80 i spent.. i mean it doesn't give you 50whp but for the money it's definitely worth,... but i also have a question.. what is the difference in how many rings i place on the inside with the spring? i tried a few different set ups and didn't notice anything.. can someone help me out on this? :confused:

i think you need the Piston ram type 007 DV, not the diaphram type.

lostntainted
09-27-2005, 10:23 AM
i think you need the Piston ram type 007 DV, not the diaphram type.

??? the one i have is exactly like the other one for sale on here that was posted up today.. i was just wondering how many rings i should have on the inside cause i was given 3 but have only one in right now

intricate976
09-27-2005, 10:34 AM
So is this the piston forge 007 or teh diaphram forge dv-r that is up for sale?

lostntainted
09-27-2005, 10:37 AM
i think you need the Piston ram type 007 DV, not the diaphram type.

your thread = http://www.surveillancesystemsonline.com/images/products/MSJ_Lady_Automatic_Car_Jack.jpg

sorry!