Dubbers
Sticky Threads
If ya find hot photos of dubs.. post them! (photos posted where found on other forums and hotlinked by people who enjoy looking at them too) One such forum is motoringunderground.com So.. enjoy!
hey guys not sure where i got these but i was supposed to send these out to someone on here and figured others might enjoy the info as well :corn: http://www.parts4vws.com http://www.performance-cafe.com http://www.performancevwmag.com/forum http://www.pgperformance.com...
VOLKSWAGEN ANNOUNCES VOLUNTARY SAFETY RECALL OF 1999-2005 MODEL YEAR PASSATS Auburn Hills, Mich. - Volkswagen Group of America, Inc. has announced a voluntary recall of all gasoline powered Passat models from 1999 through 2005 for inspection and repairs, if required. Some Passat vehicles...
Normal Threads
I want to run some white rota grids but I'm not sure about the fitment, am I going to need adapters? I'm thinking 18x9.5
Last weekend I found out that my 2003 1.8t gti is chipped with apr. Looks like i have three programs. I called the local apr dealer to see if I can find out which programs I have in it and get the identification code. Before I can do that i will need to pay APR's $150 warranty transfer. Is it...
:tup2: Yup, since the Wolfie is already on it's way out, it is time to keep track of the progress on the new 1991 GTi 2.0 16V I picked up from Brady! Initial progress: - It's in the garage - It's problems include a bad freeze plug (leaking coolant from freeze plug) and when the...
A while ago we built a 2004 VW R32 for a customer and he recently purchased a B7 Audi RS4 and needed to sell the car. There was a very large amount of work that went into the car that we did almost all of so we know the car's history. Also the vehicle has low mileage on the chassis (29,000) and on...
Just picked up one of these, and need some help picking some wheels.. Was leaning towards some Black CH's.. But post up some ideas..
so i need some help. I have an 07 vw rabbit and i got it new from the dealer (riverside) and i have been taking it to the ontario dealer every 5k miles for maintenance. I just passed the 40k point and they recomended the 40k service. I thought it would be a good idea to do and asked how much it...
I have a 2002 1.8t gti and it is stalling and having an extremely rough idle and has left me stranded twice so far. It throws the codes p0638 and p0221... Im thinking this points to a bad throttle body, but i wanted to try a TBA before I bought one. anybody with a full functional vag-com want to...
Well I have a set of Volk RE30s that I just got trued and painted flat black that are just waiting to be put on my car but I really want to have a place that is good at mounting tires cause i really dont want the paint that I just bought to be ruined. My Friend at lexus said he would mount them but...
So I am in the final steps of ordering the Pagparts Big Turbo Kit for my car and one of the recommended modifications to the engine is to put a heat shield over the coil packs to protect them from the heat of the larger turbo that will be closer to the top of the engine. In order to install...
The original plan was to put my extra 20V 1.8T in my Scirocco, but after getting this car it just makes more sense to leave the Scirocco a 16V and running well. Since the GTI isn't running and needs engine work, I'm just going to do the 20V swap with it. Here is the the subject: 1990...
I guess I haven't logged in here for a while :o Got a reminder e-mail today, and being a holiday, thought I'd pop on by. This was my golf, bought it @ City when it was stock Sold it earlier this year .. after 5 yrs, it was time to move on .. it wasn't getting driven and needed more $$...
So check it out I sold the Alphards and came across some Borbet type A's with rubber for a great price. The question is now do I get them on the gti or stick with my white walls and smoothies. I'll eventually get white walls on the borbets but i just don't know... Borbet's: already have a...
i parked my white mk3 gti infront of my house last night woke up this morning and its gone..... car has euro bumpers, white smoked tails, socaleuro stickers broadway mirror the paint is in perfect condition and the car is very low. let me know if anyone see's it im guessing its already gone.
Ok, cars a 1996 OBD II GTI, motor has 120K, and recently I get throttle surging at 3000 rpm, when the pedal is held in the same position. Cam is a 276, at -4 degrees. P-FLO Autotech chip, MAF is new, IAT is new All coolant temp sensors are new. Neuspeed wires OEM plugs,
I'm trying to get some ideas for my next set of mods. Anyone with shots of MK4 Golfs, white with black wheels please post up what you have. My thoughts are this: black double 5 spoke wheels (similar to the BMW M5 from early 2000s) with a polished lip (not chrome) or black 5 spoke wheels like...
Having an odd issue with the brakes on Julies Beetle. First it has a CEL. Vag it and it says bad brake switch. Replace it, clear codes. Works fine. Few days later, she calls me saying the brakes are locked up and she cant drive it. I get there and it drives fine. Get it home and I can feel...
Anyone know where the adjustment is for the in headlight fogs?
I know this may be a dumb question but I don't know a whole lot about tire but here it goes. I have stock 18" RC's on my GLI, 7.5"wide with stock 225/45/18 tires. I would like to do a slight stretch so was wanting to know if a 215/35/18 would be a good suit?
sup guys did a photo shoot for this kids project. he only sent me 1 pic. =(
I thought I would introduce my new ride, as you guys have not seen it. We sill have a Ghia, so I still have a euro project, but this is my new love. My past car: The new ride:
I got a Vdub 1.8 with a Garrett GT28 thats in need of a rebuild :tdown: It makes a little squeak noise when you tap the throttle and before it gets worse I wanna rebuild it. I took a pic of the turbine and it looks as if one of the fins is messed up let me know what you guys think.
So anyone with a MK4 VR6 has undoubtedly freaked out about the rattling coming from their motor from idle to about 4000 rpm and been told what to replace namely the "manifold shifter rod". Thought i would mention that i have replaced the shifter rod bushings with both stock and after market only...
So I have been looking into purchasing a new intake manifold maybe some new injectors as well but thought I would ask a couple questions first. If I were to buy, let's say the ABD intake, how big of new injectors would I need to get? Along with those possibly new injectors would I need a new fuel...
Ok this is pertaining to my 91 2.0 16V GTI, So I installed the AEM UEGO (Wide-band A/F Gauge). I have been getting crappy mileage, and the gauge proved my idea, that the car is running rich. At around 3-3.5k rpm, it'll hold in the upper 13s. At idle (apx. 1k rpm) it holds 14.6-15.3 and...
I hate posting these things on Vortex due to a large number of, well, Vortexers. You guys are more honest. There is nothing in stone but we've been tossing around ideas. We're thinking about upgrading to an SUV in the near future and are interested in Touaregs. V6 models 04-06 seem to be in what...
Can anyone help me do the install? not feelin the $200 to pay someone to do it 949 310 4586, text if you are down
long story short when i spun my coils down the wire that clips into the shocks on the front suspension rubbed on the tire and now i have abs,asr and brake lights flashing. Car also flashes stop on the screen. Car is a 2000 gti vr6. Im wondering what this wire is since i cant seem to find it online...
my check engine light keeps turning on when i have about 55-60 miles on the meter.Can someone help me or give me an idea what it is?i've unhooked my battery to turn of the check engine light but it keeps turning on around 60 miles
2010 Jetta Black's Left was scrathed by this tree branch,, I personally think only the coating was damaged.. is there any decent product to recommend? If that product didn't work, do I have to drop it in an Autoshop? Thanks
Now this is a cool conversion.
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
